幫忙翻譯術語都是機械(數控沖床840D系統)里的。。。
- Switch elements General: Workpiece clamp closed Index pin left Index/Home positon Index pin right Index positon Release brakeX Inactive Lubricate pinion off Lubricate tapping tool off Cartridge clamping Closed Punching:Punch chute Horizontal Chip flap Open Tool lubrication off Highest position Tool change height Reference height Single stroke on strake ended Tool clamp Closed H+L diagnostics Page 1 H+L status display off H+L Lib version(PLC) 20000 H+L CPU version 2051 HL axis version 1005 Alarm tele byte 0 9HH+L diagnostics Page 2 No FH No E-STOP Overload plus Overload minus UDP LDP Stroke on Stroke not active Rod pressure Stripper clamp H+L diagnostics Page 3 LDP switch(fixed) UDP switch(fixed) Overld "+" switch(fix) Overld "-" switch(fix) Pressure sensor A1 Pressure sensor ND Pressure sensor HD Stripper rod pressure Tmp-lmp UDP/LDP Temperat UDP/LDPH+L diagnostics Page 4 Trupmpf error number Tool change height Req.clamp.posteion UDP.req. position Req.start position LDP req. position Actual Z position Current
-
問
提問者：網友
2018-07-30
