汽配人首頁 > 問答首頁

滑模攤鋪機英文產品說明書請專家幫忙翻譯

New box design with durable 0.5 inch (13 mm) paving skin Vertically-adjusting mold mount for precise leveling of mold to machine Telescoping end sections with 12 inches (305 mm) of width variation on each side are available Standard paving depth is zero to 24 inches (610 mm)Edge slump adjustment Hydraulic Vertical Hinged Sideplates, self-contained inside the mold for track clearance Split, pressure-compensated sideplates Folding side plate wings for transporting without removing Pivoting mold mounting beam to eliminate stress points Self-supported TA is hydraulically driven with 3.5 inch (89 mm) ACME screws for up to a six inch (152 mm) crown Front and rear top T-bar on mold for attaching accessories and structural integrity Inserts are bolted together with front and rear alignment pins for easy mold assembly New vibrator mounting tube attaches to T-bar on mold– Vertical vibrator lift– Rear lubrication system with grease zerks accessible from the work bridge New strike-off– Mounted on paver frame T-rail, independent of the mold– New modular design with wedge lock system for ease in changing widths– 10 inches (254 mm) of hydraulic height adjustment– Hydraulic crown adjustment Spreader plow mounted to paver frame T-rail, optional auger available Tamper bar optional: 問提問者：網友 | 2017-06-07

最佳回答

新的持久的0.5英寸（13毫米）鋪路皮膚垂直調整模具的模具精密水準測量安裝到機伸縮與12英寸（305毫米），每邊寬度的變化，可深度年底路段鋪設標準箱的設計是0到24英寸（610毫米）的邊緣低迷調整液壓垂直棚Sideplates，自我清除軌道內的斯普利特，模具內的壓力補償sideplates不刪除旋轉折疊梁運模具安裝，以消除應力點的自我支持電訊局長的水流側板翅膀驅動的3.5英寸（89毫米）到6英寸（152毫米）冠頂前后T型桿附著在模具配件和結構完整的螺栓插入與前面和后面，便于模具組裝在一起越峰螺絲對準針腳重視新振動器安裝到T管桿的模 - 垂直振動器升降機 - 從后與油脂zerks橋新的工作訪問取得過潤滑系統 - 框架式攤鋪機上的T -鐵路，模具獨立 - 新的模塊化設計，為便于楔鎖系統，改變寬度 - 10英寸（254毫米）高度調節液壓 - 液壓冠調整安裝在攤鋪機攤鋪機犁架T型導軌，可選用螺旋篡改欄可選: 回答者：網友

產品精選

我來回答